Features:
Our SonoCraft ST-360 is a powerful ultrasonic jewelry finisher for both hard and soft metals. Traditionally used to finish intricate details in most jewelry, ultrasonic polishing enables precision finishing in the tiniest of areas. SonoCraft ST-360 uses high-frequency, low-amplitude ultrasonic vibration for cleaning and burnishing, as well as bead setting and light engraving-leaving an extremely bright burnished surface. Excels at removing rapid prototyping marks and leaving a beautiful mirror finish in 1 step.
ST-360 includes an ultrasonic handpiece that is lightweight with very little vibration transmitted through it making it perfect for all day use. Also includes 3 carbide tips, 3 ceramic stones, 1 diamond file and 2 tool holders (1 can hold 2.0mm diameter and 1 can hold 2.5mm diameter), 2 spanner wrenches and 2 allen wrenches. They work on the softer metals, as well as hard metals such as platinum. Made in Japan.
A very versatile machine, the ST-360 has four ultrasonic oscillation modes:
Single Hit Mode: Tightens beads onto stones with minimal or no touch-up needed.
Intermittent Mode (Slow): Slowly repeating impacts for engraving.
Intermittent mode (Rapid): Rapidly repeating impacts for engraving.
Continuous Mode: Constant fast impact for burnishing and polishing.
SonoCraft ST-360 has a full 45 watts of power for precision finishing on hard metals like platinum as well as on gold, silver, and soft metals. ST-360 is powerful enough to quickly remove rapid prototype marks on castings for a beautiful shine. Can even do light engraving and bead setting! The HP-9706 handpiece has a cord length of 1.7M (67″), and an M6 screw thread. Overall length is 118mm (4.7″) with a 28mm (1.1″) diameter. Weighs just 300g (10.6 oz).
We offer for our ST-360 controller special kits adapted to different sectors:
Features:
Our SonoCraft ST-360 is a powerful ultrasonic jewelry finisher for both hard and soft metals. Traditionally used to finish intricate details in most jewelry, ultrasonic polishing enables precision finishing in the tiniest of areas. SonoCraft ST-360 uses high-frequency, low-amplitude ultrasonic vibration for cleaning and burnishing, as well as bead setting and light engraving-leaving an extremely bright burnished surface. Excels at removing rapid prototyping marks and leaving a beautiful mirror finish in 1 step.
ST-360 includes an ultrasonic handpiece that is lightweight with very little vibration transmitted through it making it perfect for all day use. Also includes 3 carbide tips, 3 ceramic stones, 1 diamond file and 2 tool holders (1 can hold 2.0mm diameter and 1 can hold 2.5mm diameter), 2 spanner wrenches and 2 allen wrenches. They work on the softer metals, as well as hard metals such as platinum. Made in Japan.
A very versatile machine, the ST-360 has four ultrasonic oscillation modes:
Single Hit Mode: Tightens beads onto stones with minimal or no touch-up needed.
Intermittent Mode (Slow): Slowly repeating impacts for engraving.
Intermittent mode (Rapid): Rapidly repeating impacts for engraving.
Continuous Mode: Constant fast impact for burnishing and polishing.
SonoCraft ST-360 has a full 45 watts of power for precision finishing on hard metals like platinum as well as on gold, silver, and soft metals. ST-360 is powerful enough to quickly remove rapid prototype marks on castings for a beautiful shine. Can even do light engraving and bead setting! The HP-9706 handpiece has a cord length of 1.7M (67″), and an M6 screw thread. Overall length is 118mm (4.7″) with a 28mm (1.1″) diameter. Weighs just 300g (10.6 oz).
We offer for our ST-360 controller special kits adapted to different sectors:
Unit | ST 360 |
Oscilating frequency | 21-24 KHz |
Oscilation modes | 4 |
Amplitude adjustment | continuous |
Ultrasonic power | max 45W |
Dimensions (LxHxP) | 130x250x260 mm |
Weight | 3.0 kg |
Handpiece | ST360 |
Tool holding | M6 (with M6/M4 adaptor supplied) |
Cable length | 1.7 m |
Cooling | dry air |
Dimensions | 28 x 118 mm |
Weight | 300 gr |